A new, patented safety chain lanyard with dual springhangers that offset the weight of a heavy tool to facilitate alignment and improve operator safety has been introduced by ESCO Tool of Holliston, Massachusetts.
The MILLHOG ET-800 Dual Spring hanger with an integral safety chain lets users safely maneuver all types of heavy or bulky tools without worrying about spring-only hangers that could break. Featuring a top and bottom steel plate, two drawbar springs, and a built-in chain, this safety hanger provides the balance and control needed to simplify heavy tool alignment.
Designed to limit the travel of the springs to 3.5″ and prevent bottoming out, breakage, and personal injury, the MILLHOG ET-800 Dual Spring Hanger is intrinsically safe because the 48″ L chain is rated at 4,500 lbs., is secured into milled slots on the two 8″ W x 3/8″ steel plates, and is retained by welded covers. Each drawbar spring is rated at 610 lbs.
The MILLHOG ET-800 Dual Spring hanger with an integral safety chain lets users safely maneuver all types of heavy or bulky tools without worrying about spring-only hangers that could break. Featuring a top and bottom steel plate, two drawbar springs, and a built-in chain, this safety hanger provides the balance and control needed to simplify heavy tool alignment.
Designed to limit the travel of the springs to 3.5″ and prevent bottoming out, breakage, and personal injury, the MILLHOG ET-800 Dual Spring Hanger is intrinsically safe because the 48″ L chain is rated at 4,500 lbs., is secured into milled slots on the two 8″ W x 3/8″ steel plates, and is retained by welded covers. Each drawbar spring is rated at 610 lbs.
For more information contact:
ESCO Tool
A Unit of ESCO Technologies, Inc.
Alex Brennan, Marketing Assistant
75 October Hill Road
Holliston, MA 01746
(800) 343-6926
email: alex@escotool.com
www.escotool.com
www.youtube.com/millhogman
http://www.linkedin.com/pub/alex-brennan/57/499/972